How To Remove Ray Ban Justin Lenses
Ah, Ray Ban Justins! These iconic sunglasses have been a fashion staple for years. But, let’s face it, sometimes those lenses need a change – whether it’s due to scratches, a new prescription, or just wanting a fresh look. Don't worry, you're not alone in this quest. Today, I'm going to walk you through the process of removing those lenses without breaking a sweat (or the glasses).
Introduction: Why Change Your Ray Ban Justin Lenses?
First off, why even bother changing the lenses? Well, for starters, life happens. Lenses get scratched, prescriptions change, or maybe you just want to jazz things up with a new tint. Whatever your reason, understanding the 'why' makes the 'how' a lot more meaningful.
The Tools You Need
Before we dive into the nitty-gritty, let’s talk tools. You’ll need:
- A microfiber cloth (for keeping things clean)
- A small screwdriver (sometimes)
- Patience (always)
A Quick Note on Warranty
Before you start, remember to check your warranty. Fiddling with the lenses might void it, so it’s always good to be sure.
Step 1: Cleaning and Preparing Your Workspace
Start by cleaning your workspace. A clutter-free, clean area ensures you won’t lose any small parts. Use the microfiber cloth to clean your glasses too – it's always easier to see what you're doing when there's no smudge in sight.
Step 2: Inspecting Your Frames
Next, inspect your Ray Ban Justins. Some models have a small screw holding the lenses in place, while others simply snap in and out. Knowing which type you have is crucial.
Understanding Snap-In vs. Screw-In Lenses
If your lenses are snap-in, they’ll pop out with a bit of pressure. Screw-in lenses, on the other hand, will need that small screwdriver.
Step 3: Removing Snap-In Lenses
Let’s tackle the snap-in lenses first. Here's how:
- Hold the frame firmly but gently.
- Push the lens out from the inside, applying steady pressure.
A Word of Caution
Be gentle! Applying too much force can break the frame.
What to Do If the Lens Won’t Budge
If the lens seems stuck, don’t force it. Try warming up the frame slightly with your hands to make it more pliable.
Step 4: Removing Screw-In Lenses
For screw-in lenses:
- Locate the screw – it’s usually near the temples.
- Use the screwdriver to gently loosen it.
- Once loose, the lens should come out easily.
Handling Small Screws
Be careful with the screws. They’re tiny and easy to lose.
Keeping Track of Your Screws
A good tip is to place the screws in a small dish or on a piece of tape so they don’t roll away.
Step 5: Storing the Old Lenses
Once you’ve removed the lenses, store them safely. Even if you're not planning on using them again, it’s good to have a backup.
The Importance of Safe Storage
Scratches or damage can happen even in storage, so keep them in a soft pouch or wrapped in your microfiber cloth.
Avoiding Common Storage Mistakes
Don’t just toss them in a drawer. Remember, these lenses protected your eyes; they deserve a bit of respect in retirement too!
Step 6: Inserting New Lenses
Now for the fun part – putting in the new lenses. Whether they're prescription, polarized, or just a different color, the process is pretty much the same as removal, but in reverse.
Aligning the Lenses Correctly
Make sure the new lenses align perfectly with the frame. They should fit snugly without forcing.
Snapping or Screwing Them In
If they're snap-in, a gentle push until you hear a click should do. For screw-ins, tighten the screw, but not too much.
Troubleshooting Common Problems
Sometimes things don't go as planned. Here’s how to troubleshoot:
If the Lens Won’t Fit
Double-check you have the right size and shape. Ray Ban lenses are model-specific.
When the Frame Feels Loose
If the frame feels loose after lens replacement, a quick tightening of the screws (if you have them) should fix it.
Conclusion: Enjoy Your Revamped Ray Bans!
There you have it! A step-by-step guide on removing and replacing lenses in your Ray Ban Justins. Not too complicated, right?